High Carbon Hard Composite Graphite Fiber Felt
Product Discription:
The hard composite graphite fiber felt is made by special process. The special process is used to combine graphite paper, polypropylene-based graphite felt and polyacrylonitrile-based carbon cloth into one body, solidification and setting, and secondary high-temperature purification treatment.
Supply Ability:
5000 m2 per day
Port: Tianjin, China
Packing: Wooden cases or as customer's demands.
Lead Time : 10-25 days after advance payment.
Product show:
Advantage:
1.High carbon content.
2. Anti-ablative performance and thermal shock resistance.
3.The performance is superior to airflow scouring and thermal insulation and thermal insulation performance.
Application:
The High Carbon Hard Composite Graphite Fiber Felt is mainly used in ultra-high temperature vacuum high-pressure sintering furnaces as well as electronics, semiconductor industry, solar photovoltaic (polycrystalline casting furnace, single crystal furnace) and vacuum industrial furnace equipment.
Product Discription:
The hard composite graphite fiber felt is made by special process. The special process is used to combine graphite paper, polypropylene-based graphite felt and polyacrylonitrile-based carbon cloth into one body, solidification and setting, and secondary high-temperature purification treatment.
Supply Ability:
5000 m2 per day
Packaging & Delivery:
Port: Tianjin, China
Packing: Wooden cases or as customer's demands.
Lead Time : 10-25 days after advance payment.
Specification Sheet:
Material | PAN-CF | |
Bulk density | 0.25-0.30g/cm3 | |
Carbon | ≥98% | |
Thermal conductivity | 0.25-0.35(1150ºC, W/m .k) | |
Flexural Strength | 1.5-3.0(Mpa) | |
Crushing stress at 10% compression | 0.8( N/cm2) | |
Ash | ≤500PPm | |
Processing temperature | 1800ºC | |
Operating Condition | In the air | ≤400ºC |
In the vacuum | ≤1800ºC | |
In the inert atmosphere | ≤3200ºC | |
Board Spec | Lenght (m) | 1000,1500,1800 |
Wide (mm) | 1000,1300 | |
Thickness (mm) | 20-250 | |
Tube materials Spec | Diam (mm) | ∅250-1600 |
Wall thickness(mm) | 30-130 | |
High(mm) | 300-3000 | |
Product show:
Advantage:
1.High carbon content.
2. Anti-ablative performance and thermal shock resistance.
3.The performance is superior to airflow scouring and thermal insulation and thermal insulation performance.
Application:
The High Carbon Hard Composite Graphite Fiber Felt is mainly used in ultra-high temperature vacuum high-pressure sintering furnaces as well as electronics, semiconductor industry, solar photovoltaic (polycrystalline casting furnace, single crystal furnace) and vacuum industrial furnace equipment.